Almost everyone wants to have the opportunity to build that dream home, but before you can have it built, you need to find the right person to build it for you. This means finding the contractor that you can stand to be around for at least a few months while the house is being built and also finding the contractor that can get the job done right and on time. Other legal matters will also need to be taken care of by the contractor, so before building begins, you need to be sure that these have been taken care of, as well.
When looking for a contractor, talk to your friends and relatives first to find out if they can recommend anyone to you. If they cannot, then it is time to go to the phone book. Avoid hiring a contractor over the internet if possible, but if you feel like you have to go this route, be very careful. Meet the contractor in person and obtain a number of references so you can find out just what quality work he does. Find out if there have been any problems with mold in the home or water damage due to bad plumbing or bad construction since the house was built. Ask a lot of questions about the contractor’s character and about how efficient the job was.
Find out whether the contractor’s license is current and has no claims against it at the moment. There should not be any. In California, anyone who is contracted to do work that will cost more than $500 must have a license from the Contractor’s State License Board. If you hire someone without a license, you may not be able to obtain assistance from the Board to resolve a complaint. They should have a pocket license with their name on it and the name on it should match the name of who you are talking to.
Your contractor should also have all of the appropriate insurances and he should have no problem with giving you copies of the policies for your own records. He or she should have liability and worker’s compensation insurance. They may not be required by your local law to have general liability insurance, but if they do damage to your property, you or your insurance company may have to cover the bill.
Your contractor is also responsible for getting the appropriate building permits from the city to do your project. Make sure he or she has obtained all these permits and permissions before building starts.
Jim Corkern is a writer and promoter of quality
Mold Remediation and
water damage restoration companies across the united states.
Saturday, September 29, 2007
Saturday, September 8, 2007
Mold and Your Lawn
Did you know that mold can grow on your lawn and kill all the grass that you worked so hard on during the spring, summer, and fall? Well, you might have known that mold spores and fungi like mushrooms can grow in your front and backyard, but maybe you were not aware of the mold that can grow underneath the blankets of snow that fall during the winter. It is true: if snow falls on your lawn and does not melt for a long period of time, mold can start growing and kill the grass underneath. This is especially true if the grass has not stopped growing before the snow falls and if the snow is thick and wet. Another significant factor is that the ground the snow falls on top of is not frozen.
The only real symptom that you should be able to see besides the mold growth itself is the appearance of large circular patches of dead grass. These circles can be from 3 up to 12 inches wide, but in the most extreme cases of snow mold, you may not be able to distinguish one patch from the next because the mold has killed so much of your lawn.
Pink snow mold appears to be the most dangerous to your grass and it is caused by a mold called Microdochium nivale. This mold, when it matures, can be a light to a dark pink color. This is the most dangerous kind of mold to your lawn because it kills not only the blades of grass, but also the roots. This needs to be treated as soon as possible before it kills your entire lawn, if it has not already.
Gray snow mold can be caused by a few different species in a genus called Typhula and it can be anywhere from gray to white in color. These molds typically do not do more damage to the grass than affecting the blades; the roots are not typically affected.
Snow molds like to grow in temperatures that are just above freezing and in moist conditions. Even though it is called “snow” mold, it can also be caused when leaves are left covering a patch of grass for too long.
Preventing snow mold is not too difficult, but sometimes it will occur, anyway. Do not fertilize your lawn less than six weeks before cold weather starts to come in and causes the grass to stop growing. This can cause a spurt of green growth that the mold will feed on after it starts to grow underneath the snowfall.
Jim Corkern is a writer and promoter of quality
Mold Remediation and
water damage restoration> companies across the united states. [Run 20]
The only real symptom that you should be able to see besides the mold growth itself is the appearance of large circular patches of dead grass. These circles can be from 3 up to 12 inches wide, but in the most extreme cases of snow mold, you may not be able to distinguish one patch from the next because the mold has killed so much of your lawn.
Pink snow mold appears to be the most dangerous to your grass and it is caused by a mold called Microdochium nivale. This mold, when it matures, can be a light to a dark pink color. This is the most dangerous kind of mold to your lawn because it kills not only the blades of grass, but also the roots. This needs to be treated as soon as possible before it kills your entire lawn, if it has not already.
Gray snow mold can be caused by a few different species in a genus called Typhula and it can be anywhere from gray to white in color. These molds typically do not do more damage to the grass than affecting the blades; the roots are not typically affected.
Snow molds like to grow in temperatures that are just above freezing and in moist conditions. Even though it is called “snow” mold, it can also be caused when leaves are left covering a patch of grass for too long.
Preventing snow mold is not too difficult, but sometimes it will occur, anyway. Do not fertilize your lawn less than six weeks before cold weather starts to come in and causes the grass to stop growing. This can cause a spurt of green growth that the mold will feed on after it starts to grow underneath the snowfall.
Jim Corkern is a writer and promoter of quality
Mold Remediation and
water damage restoration> companies across the united states. [Run 20]
Protect Your Infant From Mold And Possibly Eliminate Crib Death
Something that a lot parents hate and cannot understand these days are diseases and disorders that the medical community claim that they cannot do anything about at this point in time. Parents become outraged when it happens to their child and the medical community says that there was nothing that they could have done to help or to prevent it from happening and this is the case with the occurrence we have come to call SIDS -- Sudden Infant Death Syndrome.
The term itself is a misnomer: it is not a “syndrome”. It is the act of dying suddenly and inexplicably. In European countries, it is also called “cot death”, since it is most commonly associated with babies that die in their cribs. The health care system of the United States has said that there is no true explanation of why crib death occurs, but a man in New Zealand may have come up with an answer… over a decade ago.
A man in New Zealand has begun a crusade against crib death and has pointed to a very likely explanation for it.
Most flame retardant mattresses contain one of three chemicals: antimony, arsenic, or phosphorus. These chemicals are poisonous to us as human beings and you have to wonder why they are being put in our mattresses in the first place, much less in the mattress of an infant.
We all know that babies will get their mattresses and bedding wet from spilling milk, juice, urinating through their diapers, and etcetera, but what happens when these spills do not get cleaned up properly? Mold can grow in mattresses just as easily as carpet or on wet clothing, but the difference is that when mold begins to grow in a mattress made with these poisonous chemicals, they (like anything else on the planet that digests things) secrete gases. Since mold is consuming poisonous chemicals, is it not safe to say that these gases are also poisonous? An infant sleeping on its stomach and breathing in these gases would probably die, right? It is a fact that less babies have died since the advice was given to sleep a child on his or her back instead of on their stomach.
His advice says to not re-use an old baby mattress, but to buy a new one when you have another child because the instances of crib death have shown to increase with the more children you have. It is more common in children that are the 2nd, 3rd, and so on in their family.
Special mattress wraps can also be purchased out of New Zealand for less than $50.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
The term itself is a misnomer: it is not a “syndrome”. It is the act of dying suddenly and inexplicably. In European countries, it is also called “cot death”, since it is most commonly associated with babies that die in their cribs. The health care system of the United States has said that there is no true explanation of why crib death occurs, but a man in New Zealand may have come up with an answer… over a decade ago.
A man in New Zealand has begun a crusade against crib death and has pointed to a very likely explanation for it.
Most flame retardant mattresses contain one of three chemicals: antimony, arsenic, or phosphorus. These chemicals are poisonous to us as human beings and you have to wonder why they are being put in our mattresses in the first place, much less in the mattress of an infant.
We all know that babies will get their mattresses and bedding wet from spilling milk, juice, urinating through their diapers, and etcetera, but what happens when these spills do not get cleaned up properly? Mold can grow in mattresses just as easily as carpet or on wet clothing, but the difference is that when mold begins to grow in a mattress made with these poisonous chemicals, they (like anything else on the planet that digests things) secrete gases. Since mold is consuming poisonous chemicals, is it not safe to say that these gases are also poisonous? An infant sleeping on its stomach and breathing in these gases would probably die, right? It is a fact that less babies have died since the advice was given to sleep a child on his or her back instead of on their stomach.
His advice says to not re-use an old baby mattress, but to buy a new one when you have another child because the instances of crib death have shown to increase with the more children you have. It is more common in children that are the 2nd, 3rd, and so on in their family.
Special mattress wraps can also be purchased out of New Zealand for less than $50.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
What Molded Foods to Discard
Knowing what kind of food in your refrigerator that has become moldy that you should throw away can sometimes be a difficult task, especially if you do not understand what kinds of foods are affected by mold the most severely. If people would keep their refrigerators cleaned out more often, there might be less instances of mold growth in them, but mold growing in the refrigerator on some food every once in a while is fairly unavoidable. Sometimes we leave things in the fridge for too long because we forget they are there or possibly we just put off eating that particular item until it becomes moldy and it is too late to save. So, what kinds of foods can be saved if they become contaminated by mold?
Fruits and vegetables can become moldy if you leave them in the refrigerator long enough and especially if there is a bad one among them that does not get thrown out. Leaving a bad fruit or vegetable near healthy ones will inevitably cause the others to go bad in a relatively short period of time. Most molded fruits and vegetables cannot be saved because these items are porous and generally have a high content of moisture.
Other foods that contain a high moisture content such as jams, jellies, and etcetera should also be thrown out if you find mold growing on them or even just on the inner surface on the lid of the jar. The mold will contaminate the entire jar, because they are not dense foods.
Foods like cakes, cookies, breads, and other baked goods should also be thrown away because of their porous, non-dense nature. We all know that breads can become moldy and most of us throw them away and this logic is usually applied to everything else baked in the oven.
Foods like blocks of cheese and hard salami, however, can usually be saved even if they become contaminated with mold. Simply take a knife and cut around the molded area by about one inch and cut one inch underneath. Throw the molded piece away. Unfortunately, individually sliced cheeses that become moldy cannot be treated in this manner because they are moist enough that the mold “roots” will contaminate the whole slice and even possibly the entire pack. Just throw them away.
Let’s review. Items that contain a lot of moisture such as cream cheese, sour cream, and etcetera should be thrown away. Foods that are also very porous like baked goods should also be thrown out. Dense foods like blocks of cheese and hard salami can be saved.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Fruits and vegetables can become moldy if you leave them in the refrigerator long enough and especially if there is a bad one among them that does not get thrown out. Leaving a bad fruit or vegetable near healthy ones will inevitably cause the others to go bad in a relatively short period of time. Most molded fruits and vegetables cannot be saved because these items are porous and generally have a high content of moisture.
Other foods that contain a high moisture content such as jams, jellies, and etcetera should also be thrown out if you find mold growing on them or even just on the inner surface on the lid of the jar. The mold will contaminate the entire jar, because they are not dense foods.
Foods like cakes, cookies, breads, and other baked goods should also be thrown away because of their porous, non-dense nature. We all know that breads can become moldy and most of us throw them away and this logic is usually applied to everything else baked in the oven.
Foods like blocks of cheese and hard salami, however, can usually be saved even if they become contaminated with mold. Simply take a knife and cut around the molded area by about one inch and cut one inch underneath. Throw the molded piece away. Unfortunately, individually sliced cheeses that become moldy cannot be treated in this manner because they are moist enough that the mold “roots” will contaminate the whole slice and even possibly the entire pack. Just throw them away.
Let’s review. Items that contain a lot of moisture such as cream cheese, sour cream, and etcetera should be thrown away. Foods that are also very porous like baked goods should also be thrown out. Dense foods like blocks of cheese and hard salami can be saved.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Stop Snow Mold From Eating Your Lawn
Most of us enjoy a nice patch of thick green grass under our feet during the spring and summer, but unfortunately for those people who live in areas that get thick blankets of snow, this might actually be something that they take for granted. Mold becomes a problem for some lawns during the winter time and can absolutely wreak havoc on them while that thick and beautiful blanket of snow graces your front yard. By the time it melts, you will be left with dead circular patches of grass all over and not a clue as to how they got there.
Mold is a problem generally when a thick and wet layer of snow falls on your front yard before the ground has had a chance to freeze and render the mold spores and fungus living there dormant. This means that when the blanket of snow is resting on your lawn and insulating it throughout the winter, mold is free to run amok and have a feast on it.
The symptoms of this lawn disease are typically circular patches of dead grass all over the lawn, but if the infection is severe, then you may not even be able to see these as circular patches due to the amount of grass that has been killed.
There are at least two different kinds of snow mold and these are pink and gray. The pink variety of snow mold seems to be the most dangerous of the two, as it is able to reach the roots of the grass and completely kill it. This is caused by the mold Microdochium nivale and can be anywhere from a light pink to a deep salmon-pink type color.
Gray snow mold is, as you would guess, anywhere from gray to white in color, but it is not caused by a specific mold. It is caused by molds in the genus Typhula. These molds do not affect more than the blades of grass and will not kill the grass down at the roots.
Snow mold occurs most often when a blanket of snow falls on a patch of ground that is not frozen and does not melt for an extended period of time. It can also occur, however, when fall leaves are let to cover a patch of grass for a long time. The best thing that you can do to prevent snow mold is to keep mowing your lawn as long as it keeps growing and do not fertilize your lawn less than six weeks before cold weather rolls in.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Dallas Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Mold is a problem generally when a thick and wet layer of snow falls on your front yard before the ground has had a chance to freeze and render the mold spores and fungus living there dormant. This means that when the blanket of snow is resting on your lawn and insulating it throughout the winter, mold is free to run amok and have a feast on it.
The symptoms of this lawn disease are typically circular patches of dead grass all over the lawn, but if the infection is severe, then you may not even be able to see these as circular patches due to the amount of grass that has been killed.
There are at least two different kinds of snow mold and these are pink and gray. The pink variety of snow mold seems to be the most dangerous of the two, as it is able to reach the roots of the grass and completely kill it. This is caused by the mold Microdochium nivale and can be anywhere from a light pink to a deep salmon-pink type color.
Gray snow mold is, as you would guess, anywhere from gray to white in color, but it is not caused by a specific mold. It is caused by molds in the genus Typhula. These molds do not affect more than the blades of grass and will not kill the grass down at the roots.
Snow mold occurs most often when a blanket of snow falls on a patch of ground that is not frozen and does not melt for an extended period of time. It can also occur, however, when fall leaves are let to cover a patch of grass for a long time. The best thing that you can do to prevent snow mold is to keep mowing your lawn as long as it keeps growing and do not fertilize your lawn less than six weeks before cold weather rolls in.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Dallas Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Dallas Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Texas Water Damage Restoration and
Dallas Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Dallas Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Texas Water Damage Restoration and
Dallas Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Dallas Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Texas Water Damage Restoration and
Dallas Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Ordinary Water Damage Prevention Tips
The majority of water damage to your home can be avoided if you just take a few simple steps. They are not as hard as you might think and you will be safeguarding the value of your home for years to come. Repairs for water damage do not typically come cheap unless you do it yourself and use less than ideal building materials, so why not do your best to avoid the problem altogether?
You might not be thinking about the structural integrity of your home when the washing machine or the bath tub overflows, but you probably should be. If you are a forgetful person that allows this to happen a lot more than it probably should, you could actually be doing quite a bit of damage to the floor of your home. Overflows like this should be avoided at all costs, but we are all a little forgetful sometimes.
Something that we also do not typically think about most of the time is whether or not the steam that exists in our kitchens and bathrooms actually has anywhere to go while we are bathing or cooking dinner. The sad fact is that if the steam does not have anywhere to go, it will stick to your walls, ceiling, and cabinets and be completely absorbed by them. When drywall absorbs too much water, the paper on the outside of it can start to sag and eventually, the entire board becomes weakened by it. Combine that with the unsightly appearance of water stains and you have a fair sized problem on your hands. The solution is to install a steam vent into both of these rooms near the source of the steam.
Keep your rain gutters cleaned out every fall. The purpose of the gutters is to collect the water that slides off of your roof when it rains, channel it to downspouts, and eventually down to the ground and away from the foundation of the home. Water that settles around the foundation of your home can be a real problem if you let it happen over years of time, because it can cause the home to start sinking into the ground.
Any leaks that you find in your roof need to be fixed as often as necessary, because a roof leak can ruin not only ceiling drywall, but also the fiberglass insulation that you might have in your attic. This insulation becomes completely useless and heavy when it gets wet and can eventually cause the drywall underneath it to collapse.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Dallas Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
You might not be thinking about the structural integrity of your home when the washing machine or the bath tub overflows, but you probably should be. If you are a forgetful person that allows this to happen a lot more than it probably should, you could actually be doing quite a bit of damage to the floor of your home. Overflows like this should be avoided at all costs, but we are all a little forgetful sometimes.
Something that we also do not typically think about most of the time is whether or not the steam that exists in our kitchens and bathrooms actually has anywhere to go while we are bathing or cooking dinner. The sad fact is that if the steam does not have anywhere to go, it will stick to your walls, ceiling, and cabinets and be completely absorbed by them. When drywall absorbs too much water, the paper on the outside of it can start to sag and eventually, the entire board becomes weakened by it. Combine that with the unsightly appearance of water stains and you have a fair sized problem on your hands. The solution is to install a steam vent into both of these rooms near the source of the steam.
Keep your rain gutters cleaned out every fall. The purpose of the gutters is to collect the water that slides off of your roof when it rains, channel it to downspouts, and eventually down to the ground and away from the foundation of the home. Water that settles around the foundation of your home can be a real problem if you let it happen over years of time, because it can cause the home to start sinking into the ground.
Any leaks that you find in your roof need to be fixed as often as necessary, because a roof leak can ruin not only ceiling drywall, but also the fiberglass insulation that you might have in your attic. This insulation becomes completely useless and heavy when it gets wet and can eventually cause the drywall underneath it to collapse.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Dallas Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Subscribe to:
Posts (Atom)
